Newbie question lambda g
Hi, im totally new to uw, but have a 4th Ed book by Pozar and am slowly plowing through it. I have an Elec Eng degree but been out if it for years doing IT, so Im learning a lot of this from scratch as a hobby.
My question is with a WR430 waveguide, for calculating where 1/4 wavelength locations should be along the waveguide - should i use the free air wavelength, or use the lamdba g ( waveguide wavelength)?
I believe you should use lambda guide, as described here
But I would hold out for a second opinion!
Agreeing with the previous answer and from what I've learned, I would say wavelength in a waveguide is modified with regards to the wavelength in an unbounded medium by the m and n indexes of the mode that you consider, as the propagating wave is not a perfect plane wave unless you go very high in frequency...
You can also check your Pozar(MWEng, 4ed. p112), Balanis(Adv.Eng.Electromags,1ed. p354) or Ramo (Fields&Waves in CommElectr, 3ed. p418) or go to the classics: Marcuvitz (WaveguideHandbook, Ch1)
Hope this helps.
Also, from Feynman lectures, which are very easy to read through, you can see it´s in line with Microwaves101: see formula (24.19), you can find the lecture on this link
You need to use lambda g which is the wave length inside the wave guide for a particular frequency
Sign in or register to add a comment.
Add a Comment
About Our Site
Biological Effects and Applications
Computer Aided Design
Emerging Applications and Technology
Filters and Passives
MMIC and RFIC
Packaging and Materials
Sources and Receivers
Test and Measurement
Market research question - TDUs
Coupler Design Question
switch diode question
S parameter question
Terms of Service
Useful Hints and Tips
Created with PlushForums
© 2022 Microwaves 101 Discussion Board